Non Slip Sealers


Non Slip Concrete Sealers


Foundation Armor manufactures a complete line of professional grade non-slip sealers and anti-skid coatings.

 

 




Penetrating Sealers


Foundation Armor’s line of penetrating concrete sealers are designed to penetrate through the concrete surface where they chemically react within the pores. They are naturally non-slip, as they will not change the surface characteristics of the concrete. LEARN MORE


 

 


Wet Look and High Gloss Coatings


Foundation Armor’s line of wet look and high gloss coatings can be enhanced with the Armor Non-Slip additive to provide more surface traction, reducing the slipperiness of the surface when wet. The Armor Non-Slip additive is available in both Fine and Coarse, and an easily be mixed into the coating prior to applying the top coat. LEARN MORE

 

 



Water Repellent Sealers


Foundation Armor water repellent sealers penetrate deep into the surface of the concrete where they chemically react to form a hydrophobic barrier within the pores. The hydrophobic barrier will reduce surface water absorption by up to 95%, leaving the concrete more resistant to snow and ice, road salts, mold and mildew, and efflorescence. These naturally non-slip sealers will not change the look or color of the surface, and they will not leave behind a visible surface film. Foundation Armor water repellent sealers can protect the surface of concrete for up to 10 years before the need to reseal.


Armor SX5000 - DOT-Approved solvent based Silane Siloxane water repellent sealer.


Armor SX5000 WB - DOT-Approved water based Silane Siloxane water repellent sealer.


Armor SC25 - Cost effective water based Siliconate water repellent sealer.


Armor WL550 - Solvent based matte wet look water repellent sealer.


 

 

 




Concrete Densifiers & Surface Hardeners


Foundation armor concrete densifiers and surface hardeners are designed for use on polished concrete, concrete that is weak or deteriorating, or concrete that requires an increase in surface hardness. They penetrate deep into the concrete where they chemically react to form a permanent Calcium Silicate Hydrate (CSH) structure within the pores. Surfaces sealed with a Foundation Armor concrete densifier and surface hardener will experience an increase in strength and density of up to 45%.


Concrete densifiers and surface hardeners do not cause water or liquids to bead off the surface. If your concrete requires an increase in strength and water repellency, you must first apply a densifier and then apply a water repellent sealer 5-7 days later.


Armor S2000 - Concentrated sodium silicate densifier and surface hardener for porous surfaces.


Armor L3000 - Concentrated lithium silicate densifier and surface hardener for dense surfaces.

 

 

 



Wet Look & High Gloss Coatings


Foundation Armor wet look and high gloss coatings can be slippery when wet, but when the Armor Non-Slip additive is added to the top coat it will help to significantly reduce the slipperiness of the surface when wet. The Armor Non-Slip additive is available in Fine and Coarse and is mixed into the coating prior to applying the top coat. It is easy to add and instantly makes a noticeable difference.


Non-Slip Additive - Non Slip additive for Foundation Armor coatings.


Armor AR350 - DOT-Approved solvent based Silane Siloxane water repellent sealer.


Armor AR500 - DOT-Approved water based Silane Siloxane water repellent sealer.


Armor WB25 - Cost effective water based Siliconate water repellent sealer.


Armor AX25 - High gloss siloxane infused solvent based acrylic sealer for pool decks.


Armor UTN60 - Industrial grade aliphatic urethane coating for interior concrete.


Armor Epoxy - Industrial grade epoxy coating for interior concrete.