Fast & Free, Same Day Shipping

(866) 306-0246

Free Shipping on All Orders

(866) 306-0246

Schools & Universities

Foundation Armor manufactures several concrete sealers and coatings that can be used to seal, protect, and enhance a variety of interior and exterior surfaces. From outside patios to inside foyers, cafeterias to building exteriors, Foundation Armor has a product for your application. Use the links below to shop by product, or call us directly at 866-306-0246 for help with product selection.

Sealer Type

Penetrating Sealers

Foundation Armor penetrating sealers are designed to protect your concrete, brick, pavers, stone, and masonry from below the surface. They will not leave behind a visible surface film and will provide years of protection before the need to reseal.
Exterior
INterior

natural Finish

water-based

Penetrating

SX5000 WB

The Armor SX5000 WB is a Department of Transportation approved water based Silane-Siloxane water repellent sealer for unsealed concrete, brick, stone and masonry.

Highlights

Buy Now
Exterior

matte wet look Finish

solvent based

Penetrating

WL550

The Armor WL550 is a penetrating, solvent-based matte wet-look sealer for unsealed concrete, brick, pavers, stone and masonry.

Highlights

Buy Now
Exterior
INterior

natural Finish

solvent based

Penetrating

SX5000

The Armor SX5000 is a Department of Transportation approved solvent based Silane-Siloxane water repellent sealer for unsealed concrete, brick, stone and masonry.

Highlights

Buy Now
Exterior
INterior

natural Finish

water-based

Penetrating

S2000

The Armor S2000 is a water based sodium silicate concrete densifier and surface hardener for unsealed concrete surfaces.

Highlights

Buy Now
Exterior

natural Finish

water-based

Penetrating

SC25

The Armor SC25 is a water based siliconate water repellent sealer for unsealed white or light concrete surfaces.

Highlights

Buy Now
Exterior
INterior

natural Finish

water-based

Penetrating

L3000

The Armor L3000 is a water based lithium silicate concrete densifier and surface hardener for unsealed concrete surfaces.

Highlights

Buy Now

Sealer Type

Wet Look Sealers

Foundation Armor wet look sealers are designed to darken the surface to instantly renew dull and faded surfaces. They are available in matte, low gloss, and high gloss finishes. In addition to providing a lasting wet look, Foundation Armor wet look sealers will help to reduce damage and deterioration caused by surface abrasion and water absorption.
Exterior
INterior

AR350

The Armor AR350 is a solvent-based pure acrylic sealer designed to enhance and protect concrete and concrete pavers with a low gloss wet look.

Highlights

Buy Now
Exterior
INterior

AR500

The Armor AR500 is a solvent-based pure acrylic sealer designed to enhance and protect concrete and concrete pavers with a high gloss wet look.

Highlights

Buy Now
Exterior

WL550

The Armor WL550 is a penetrating, solvent-based matte wet-look sealer for unsealed concrete, brick, pavers, stone and masonry.

Highlights

Buy Now
Exterior

AX25

The Armor AX25 is a solvent based siloxane-infused high gloss acrylic sealer. It offers superior water repellency benefits, making it the perfect sealer for pool decks and areas constantly exposed to water.

Highlights

Buy Now
Exterior

AG Brown Seal

The Armor AG Brown Seal is a solvent-based acrylic sealer designed to enhance and protect concrete with a semi-transparent brown tinted high gloss finish.

Highlights

Buy Now
Exterior
INterior

LV25

The Armor LV25 solvent-based acrylic cure and seal is designed to enhance and protect new concrete with a high gloss wet look.

Highlights

Buy Now
Exterior
INterior

LV15

The Armor LV15 solvent-based acrylic cure and seal is designed to enhance and protect new concrete with a low gloss wet look.

Highlights

Buy Now

Sealer Type

Low Gloss Sealers & Coatings

Foundation Armor’s extensive line of low gloss sealers and coatings is designed to instantly renew and protect a variety of concrete and concrete paver surfaces. Whether you need an easy-to-apply acrylic sealer for exterior concrete, or require a durable coating that can provide years of protection against surface abrasion, Foundation Armor has a low gloss solution for your application.
Exterior
INterior

low-gloss wet look Finish

solvent based

Acrylic

AR350

The Armor AR350 is a solvent-based pure acrylic sealer designed to enhance and protect concrete and concrete pavers with a low gloss wet look.

Highlights

Buy Now
Exterior
INterior

low-gloss Finish

water-based

Acrylic

WB15

The WB15 is a water based acrylic cure and seal designed to enhance and protect new and existing concrete, and concrete pavers with a low gloss finish.

Highlights

Buy Now
Exterior
INterior

low-gloss wet look Finish

solvent based

Acrylic

LV15

The Armor LV15 solvent-based acrylic cure and seal is designed to enhance and protect new concrete with a low gloss wet look.

Highlights

Buy Now
INterior

matte Finish

water-based

urethane

UTX60 – Matte

The Armor UTX60 Matte is a water-based matte/low gloss urethane coating designed to offer superior protection against damage and deterioration caused by surface abrasion, vehicle traffic, and chemical spills.

Highlights

Buy Now
INterior

matte Finish

water-based

Acrylic

Concrete Wax – Matte

The Armor Wax – Matte is designed to instantly enhance sealed and unsealed interior concrete surfaces, and revive old concrete coatings with an attractive, lasting matte finish.

Highlights

Buy Now

Sealer Type

High Gloss Sealers & Coatings

Foundation Armor’s extensive line of high gloss sealers and coatings is designed to instantly renew and protect a variety of concrete and concrete paver surfaces. Whether you need an easy-to-apply acrylic sealer for exterior concrete, or require a durable urethane coating that can provide years of protection against surface abrasion, Foundation Armor has a high gloss solution for your application.
Exterior
INterior

high-gloss wet look Finish

solvent based

Acrylic

AR500

The Armor AR500 is a solvent-based pure acrylic sealer designed to enhance and protect concrete and concrete pavers with a high gloss wet look.

Highlights

Buy Now
Exterior

high-gloss wet look Finish

solvent based

Acrylic

AX25

The Armor AX25 is a solvent based siloxane-infused high gloss acrylic sealer. It offers superior water repellency benefits, making it the perfect sealer for pool decks and areas constantly exposed to water.

Highlights

Buy Now
Exterior

high-gloss wet look Finish

solvent based

Acrylic

AG Brown Seal

The Armor AG Brown Seal is a solvent-based acrylic sealer designed to enhance and protect concrete with a semi-transparent brown tinted high gloss finish.

Highlights

Buy Now
Exterior
INterior

high-gloss Finish

water-based

Acrylic

WB25

The WB25 is a water based acrylic cure and seal designed to enhance and protect new and existing concrete, and concrete pavers with a high gloss finish.

Highlights

Buy Now
INterior

high-gloss Finish

solvent based

urethane

UTN60

The Armor UTN60 is a 60% solids solvent-based high gloss aliphatic urethane coating designed to offer superior protection against damage and deterioration caused by surface abrasion, vehicle traffic, and oil and gas.

Highlights

Buy Now
Exterior
INterior

high-gloss wet look Finish

solvent based

Acrylic

LV25

The Armor LV25 solvent-based acrylic cure and seal is designed to enhance and protect new concrete with a high gloss wet look.

Highlights

Buy Now
INterior

high-gloss Finish

water-based

Acrylic

Concrete Wax – Gloss

The Armor Wax – Gloss is designed to instantly enhance sealed and unsealed interior concrete surfaces, and revive old concrete coatings with an attractive, lasting high gloss finish.

Highlights

Buy Now
INterior

high-gloss Finish

water-based

urethane

UTX60 – High Gloss

The Armor UTX60 High Gloss is a water-based color-optional high gloss urethane coating designed to offer superior protection against damage and deterioration caused by surface abrasion, vehicle traffic, and chemical spills.

Highlights

Buy Now
INterior

high-gloss Finish

water-based

epoxy

Epoxy

The Armor Epoxy is an industrial grade high performance concrete coating designed to enhance and protect interior concrete floors. It can be used as a complete coating system, or as a bonding primer to other urethane and epoxy coating systems.

Highlights

Buy Now

Information & Resources

How to Enhance Dull or Faded Concrete

Read More

Best Salt Water Pool Deck Sealers

Read More

Concrete Sealer Comparison

Read More

featured at the following

About Us

Foundation Armor is a multi-generational family owned and operated business. Our brand very closely aligns with our values, and represents honesty, quality, and reliability. In every conversation, our priority is to provide our customers with the information they need to make the best purchasing decision for their project, even if that solution is one we aren’t able to provide. Your home is one of the largest investments you will ever make, and we are here to help you protect it, elevate it, and enjoy it.

GET IN TOUCH

T (866) 306-0246

Foundation Armor

3 Howe Drive, Suite 2, Amherst, NH 03031

CAGE Code: 77PK6

DUNS: 078654562

Primary NAICS: 325510

Women Owned Business Certified (WBENC)

DOT DBE Certified

Links

Copyright 2023 Foundation Armor. All Rights Reserved.  Premium Concrete Sealers and Concrete Coatings

Site Design and Development by Danconia

Visit Us

Facebook Twitter Youtube Pinterest