Fast & Free, Same Day Shipping

Fast & Free, Same Day Shipping

Fast & Free, Same Day Shipping

Close this search box.

Is It Possible to Get a High Gloss Finish on Pavers?

In short, yes it is possible, but not always during the first application. Pavers are very porous and will absorb any liquid applied to the surface. In order to prevent sealers from penetrating deep into the pavers, resin needs to form within the pores that will force the acrylic to remain closer to the surface. The best way to do this is to apply at least two coats, and allow each coat to cure before applying another coat. Water based acrylic sealers like the Armor WB25 should be recoated between 4-24 hours, and solvent based acrylic sealers like the Armor AR500 should be recoated after 24 hours. While some pavers can achieve a high gloss finish with two coats, some pavers may require a third coat.

If it is your first time sealing the pavers, it will take more material to achieve a high gloss. Once the pavers have been sealed and a solid resin base has formed, recoating will require less material to achieve and maintain a gloss finish. The best way to determine what a sealer will look like on your pavers is to apply the sealer to a test area. This will help to not only determine what the pavers will look like once sealed, but also help to determine how many coats will be required to achieve the desired finish.

If you need help with product selection or application, please don’t hesitate to reach out to a Foundation Armor technician.

Products You May Like

high-gloss wet look Finish

solvent based



The Armor AX25 is a solvent based siloxane-infused high gloss acrylic sealer. It offers superior water repellency benefits, making it the perfect sealer for pool decks and areas constantly exposed to water.


Product Selector

By Using the Product Selector, you agree to the Terms and Conditions of using the Product Selector.

The Foundation Armor product selector is intended to provide information to help you select the appropriate product for your application, based on the information you provide. The product selector is not binding, and is not guaranteed to be 100% accurate. The Product Selector also doesn’t include every possible scenario. Ultimately, it is up to the purchaser/user/installer to determine product selection and product compatibility. Foundation Armor does not assume any liability for the results displayed by the product selector, or for the choices/decisions made by the purchaser/user/installer/individual taking the quiz.