facebook

Wet Look Sealers

Foundation Armor wet look sealers are designed to make concrete surfaces look wet. New surfaces are instantly enhanced, and old surfaces are instantly renewed. Foundation Armor wet look sealers provide years of life, and protect against damage caused by water absorption and surface abrasion.


Foundation Armor manufactures two types of wet look sealers. The first type of wet look sealer penetrates into the concrete and works entirely below the surface without leaving a visible surface film, and the second type of wet look sealer penetrates into the concrete in order to bond, but also leaves behind a visible gloss surface film.


  • WL5550: Wet look water repellent sealer that won’t leave a visible surface film or gloss. The Armor WL550 will darken the surface to make it look wet, and reduce damage and deterioration caused by water absorption. The Armor WL550 can be applied to unsealed concrete, pavers, brick, unglazed tile, flagstone, aggregate, and natural stone.
  • AR350: Wet look low gloss sealer. The Armor AR350 will darken the surface to make it look wet, and provide a visible, protective, low gloss surface film. The Armor AR350 can be applied to unsealed concrete and pavers, as well as concrete and pavers previously sealed with a solvent based acrylic sealer.
  • AR500: Wet look high gloss sealer. The Armor AR500 will darken the surface to make it look wet, and provide a visible, protective, high gloss surface film. The Armor AR500 can be applied to unsealed concrete and pavers, as well as concrete and pavers previously sealed with a solvent based acrylic sealer
  • AX25: Wet look high gloss sealer for pool decks. The Armor AX25 combines a water repellent sealer and an acrylic sealer into one product. It will darken the surface to make it look wet, and provide a visible, protective, high gloss surface film. It offers superior water repellency characteristics and can also be used as a cure and seal. The Armor AX25 can be applied to unsealed concrete and pavers, as well as concrete and pavers previously sealed with a solvent based acrylic sealer

Armor WL550 Wet Look Sealer - Matte Finish

The Armor WL550 is a versatile wet look sealer that can be used on virtually all types of porous masonry including concrete, brick, flagstone, natural stone, pavers, aggregate, and more. It will darken the surface to make it look wet, and it won't leave behind a visible surface film. The Armor WL550 doubles as a water repellent sealer and will reduce damage and deterioration caused by water absorption such as cracking, spalling, pitting, and staining. The Armor WL550 is a great sealer if you are looking for a low-maintenance solution to enhancing and protecting your concrete or masonry surface.


For best results, two coats are suggested with either a roller or pump sprayer. Coats should be applied wet-on-wet. The Armor WL550 can be applied to unsealed concrete and masonry surfaces. The best time to apply the Armor WL550 wet look sealer is late afternoon or early evening, when the surface is completely dry and has had time to cool down from exposure to the sun. On average, a 5 gallon pail will cover up to 500 FT2 in two coats (varies depending on surface porosity).

Armor AR350 Wet Look Sealer - Low Gloss

The Armor AR350 is a great wet look sealer if you are looking to darken the surface of your concrete or pavers, and enhance them with a low gloss finish. The Armor AR350 will also keep the surface protected against damage, deterioration, and staining caused by surface spills and surface abrasion. The Armor AR350 is a great sealer if you are looking to enhance and protect your concrete or pavers.


For best results, two coats are suggested with either a roller or pump sprayer. Coats should be spaced out 4-24 hours to allow for proper curing and build. The Armor AR350 can be applied to unsealed concrete and paver surfaces, or to surfaces that have been previously sealed with a solvent based acrylic (test areas are always suggest to determine suitability). The best time to apply the Armor AR350 wet look sealer is late afternoon or early evening, when the surface is completely dry and has had time to cool down from exposure to the sun. On average, a 5 gallon pail will cover up to 500 FT2 in two coats (varies depending on surface porosity).


The Armor AR350 wet look sealer comes in clear, but it is also available in several color options. Non-slip additives are also available.

FEATURED PRODUCTS

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (1 GAL)

$54.95

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

16 OZ Sample Armor AR350 Wet Look Sealer

$10.00

Armor Wet Look Sealers - High Gloss

If you are looking for a wet look, and also want a high gloss finish, the Armor AR500 or Armor AX25 are great options! They will darken the surface of your concrete or pavers, and enhance them with a high gloss finish.

Armor AR500 -The Armor AR500 high gloss sealers is a solvent based pure acrylic lacquer that will darken the surface of concrete and pavers, giving them the appearance of being wet. The high gloss finish left behind will help to enhance concrete and pavers, and protect them against water absorption and surface abrasion.

Armor AX25 - The Armor AX25 high gloss sealer is a Siloxane infused solvent based acrylic sealer that will darken the surface of the concrete and pavers. The Siloxane water repellent allows it to offer superior water repellency, making it the perfect sealer for areas constantly exposed to water, such as a stamped concrete or paver pool decks. The Armor AX25 doubles as a cure and seal and can be applied to new concrete.


For best results, two coats are suggested with either a roller or pump sprayer. Coats should be spaced out 4-24 hours to allow for proper curing and build. The Armor AR500 and Armor AX25 can be applied to unsealed concrete and paver surfaces, or to surfaces that have been previously sealed with a solvent based acrylic (test areas are always suggest to determine suitability). The best time to apply the Armor AR500 or Armor AX25 sealer is late afternoon or early evening, when the surface is completely dry and has had time to cool down from exposure to the sun. On average, a 5 gallon pail will cover up to 500 FT2 in two coats (varies depending on surface porosity).

FEATURED PRODUCTS

Armor AX25 Siloxane Infused High Gloss Acrylic Concrete Sealer (5 GAL)

Armor WB25 High Gloss Water Based Acrylic Concrete Cure and Seal (5 GAL)

Armor Non Slip Additive for Acrylic and Urethane Concrete Sealers - 16 OZ

 

TOP