Water based acrylic concrete cure and seal for new concrete. Cures concrete and protects surface with a high gloss finish.
The Armor WB25 is a water based acrylic cure and seal that meets or exceeds ASTM 1315 and ASTM C 309 standards. When properly applied, the Armor WB25 will help concrete to properly cure by reducing premature moisture loss. It will also help to reduce deterioration caused by surface abrasion, foot traffic, and spills.
While the Armor WB25 is approved as a cure and seal, it can also be applied to existing concrete and paver surfaces to achieve a long lasting, UV resistant, breathable high gloss finish.
Coverage rates vary depending upon surface porosity and texture, and application method. Excessive build up should be avoided.
Old or Porous Surfaces 875-1225 ft2 /pail in one coat
Dense or Trowel Finished Surfaces 1250-1625 ft2 /pail in one coat