facebook

Foundation Armor concrete sealers are made right here in the U.S.A., and can quickly be shipped to all 50 states. Whether you are a homeowner looking to seal your garage floor or driveway, or a contractor looking to seal a warehouse floor or bridge deck, Foundation Armor has a solution for you. Our Technical Support staff is always available to help you with everything from product selection to application, maintenance, and everything in between. Not sure which product you need? Chat with us LIVE, or call us direct at 866-306-0246.

Foundation Armor sealers can be applied to interior and exterior, vertical and horizontal, concrete, pavers, aggregate, stamped concrete, and natural stone. 

Colored/Tinted Concrete Sealers

Foundation Armor clear and tinted concrete sealers are made from high quality, U.S. manufactured resins that are designed to enhance and protect a variety of interior and exterior surfaces. They will never yellow or flake, and can provide years of life and protection before the need for a recoat.

Clear Concrete Sealers For Colored Concrete: Foundation Armor clear concrete sealers are designed to enhance integrally colored or acid stained surfaces. They will darken dull or faded coloring, while providing a protective, long lasting satin to high gloss finish.

Tinted Concrete Sealers: Foundation Armor satin and high gloss sealers come in clear, as well as several color options. They are a great alternative for renewing surfaces that are in need of an aesthetic makeover.

LEARN MORE

Cure N Seal

Foundation Armor cure and seals are designed to cure, seal, and protect new concrete surfaces. They aid in water retention and proper curing, provide better film formation, early water resistance, adhesion, toughness and outstanding efflorescence and alkali resistance. They are UV stable and will not yellow.

Foundation Armor cure and seals are available in clear and colored, and come in a variety of finishes including matte, satin, and high gloss. They are easy to apply with a roller or sprayer, and will provide years of life before the need for a recoat.

LEARN MORE

FEATURED PRODUCTS

Armor WB25 High Gloss Water Based Acrylic Concrete Cure and Seal (5 GAL)

Armor LV25 High Gloss Solvent Based Acrylic Concrete Cure and Seal (5 GAL)

Armor AX25 Siloxane Infused High Gloss Acrylic Concrete Sealer (5 GAL)

Hardeners and Densifiers

Foundation Armor concrete densifiers and surface hardeners are sold in concentrate and must be dilute with 3 gallons of water prior to applying. They penetrate deep into the concrete where they chemically react with the free lime and calcium to form a permanent calcium silicate hydrate (CSH) structure within the pores. Once fully cured, the CSH structure will provide the surface of the concrete with an increased strength and density of up to 45%. They help to reduce concrete dusting, reduce the movement of water and moisture through the pores, and reduce deterioration caused by surface abrasion.

LEARN MORE

FEATURED PRODUCTS

1 GAL Armor L3000 Concrete Densifier and Surface Hardener

$84.95

1 GAL Armor S2000 Concentrated Sodium Silicate Concrete Densifier Sealer and Surface Hardener

$74.95

High Gloss Sealers

Foundation Armor manufactures high gloss sealers for interior and exterior concrete and masonry surfaces. From solvent based pure acrylic lacquers to industrial aliphatic urethanes, Foundation Armor has a product that will enhance and protect your surface with a long lasting, non-yellowing, high gloss finish.

Foundation Armor high gloss sealers can be used to bring old and faded pavers back to life, or protect a garage floor from oil spills. They come in clear as well as a variety of color options. They are easy to apply and will provide years of life before the need for a recoat.

LEARN MORE

FEATURED PRODUCTS

2 GAL Armor Epoxy Coating Water Based Primer and Top Coat

$149.75

Armor UTN60 Oil and Gas Resistant Aliphatic Urethane Concrete Floor Coating

Armor AX25 Siloxane Infused High Gloss Acrylic Concrete Sealer (5 GAL)

Low Gloss Sealers

Foundation Armor low gloss sealers are designed to enhance and protect a variety of interior and exterior surfaces with a low gloss finish. They are non-yellowing, UV resistant, and will provide years of life before the need for a recoat.

Foundation Armor low gloss sealers are available in clear, as well as several color options. They can be applied with a roller or sprayer to clean, unsealed concrete, paver, and masonry surfaces. They can also be applied to concrete surfaces previously sealed with a solvent based acrylic.

LEARN MORE

FEATURED PRODUCTS

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

Non Slip Sealers

Foundation Armor manufactures penetrating sealers, which are naturally non slip, and a non-slip additive that can be added to acrylic sealers and urethane coatings.

If you are looking for a sealer that won’t change the look or color of the surface, won’t leave behind a visible surface film, and won’t make the surface slippery when wet, then you want a penetrating water repellent sealer. Water repellent sealers will provide up to 10 years of protect against deterioration caused by water absorption, without changing the look, color, or surface characteristics of the substrate.

If you are looking to enhance the surface with a wet look, low gloss, high gloss, or colored finish, then you want a Foundation Armor coating. Coatings are slippery when wet, but the Armor Non-Slip additive will help to create more traction/grip on the surface.

LEARN MORE

Penetrating Concrete Sealers

Foundation Armor manufactures several types of penetrating sealers that include permanent concrete densifiers and surface hardeners, DOT approved water repellent sealers, wet look sealers, and high gloss sealers. They are made from high quality U.S. manufactured solvents and resins, and will provide years of life and protection. LEARN MORE

Concrete Densifiers& Surface Hardeners – Increase the surface strength and density by up to 45% and reduce the movement of water and moisture through the pores.

Concrete Water Repellent Sealers – Reduce the absorption of water and other liquids on the surface by up to 95%, and reduce deterioration caused by water absorption such as cracking, spalling, and pitting.

Wet Look Sealers – Enhance dull or faded coloring and bring old surfaces back to life. Protect with a non yellowing low gloss finish.

High Gloss Sealers – Enhance dull or faded coloring and bring old surfaces back to life. Protect with a non yellowing high gloss finish.

FEATURED PRODUCTS

Armor SC25 Siliconate Water Repellent Concrete Sealer with Salt Guard (5 GAL)

Armor SX5000 WB Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor SX5000 Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Topical Concrete Sealers

Foundation Armor topical concrete sealers are designed to enhance and protect a variety of interior and exterior surfaces. They penetrate in order to bond, but leave behind a visible, protective surface film. They are available in clear, as well as several color options.

Foundation Armor topical concrete sealers can easily be applied with a roller or sprayer. They will not yellow, peel, or flake, and they will protect the surface against staining and deterioration.

LEARN MORE

FEATURED PRODUCTS

Armor AX25 Siloxane Infused High Gloss Acrylic Concrete Sealer (5 GAL)

Armor AR500 Solvent Based Wet Look High Gloss Acrylic Concrete Sealer and Paver Sealer (5 GAL)

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

Water Repellent Sealers

Foundation Armor manufactures two primary types of water repellent sealers: DOT approved SilaneSiloxane water repellents, and cost effective Siliconate water repellent sealers. Water repellent sealers help to reduce surface water absorption by up to 95%, reducing deterioration caused by water absorption such as cracking, spalling, staining, and pitting. They also help to reduce the growth of mold, mildew, and algae on the surface.

Foundation Armor water repellent sealers work entirely below the surface and will not change the look or color of the surface. They will not leave behind a visible surface film and they will not make the surface any more or less slippery when wet. They are easily applied with a pump sprayer or roller, and when properly applied can provide up to 7-10 years of life before the need for a recoat.

LEARN MORE

FEATURED PRODUCTS

Armor SC25 Siliconate Water Repellent Concrete Sealer with Salt Guard (5 GAL)

Armor SX5000 WB Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor SX5000 Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Wet Look Sealers

Foundation Armor wet look sealers are designed to give concrete and paver surfaces the appearance of being “wet”. They will darken the surface in order to bring out dull and faded coloring, and protect the surface with a low gloss or high gloss finish. They offer an aggressive bond to the concrete surface, and will never yellow, peel, or flake. When properly applied, they will provide up to 2-5 years of life before the need for a recoat.

Foundation Armor wet look sealers are available in clear, as well as several color options. They can be applied to unsealed surfaces, as well as surfaces previously sealed with a solvent based acrylic.

LEARN MORE

FEATURED PRODUCTS

Armor AX25 Siloxane Infused High Gloss Acrylic Concrete Sealer (5 GAL)

Armor AR500 Solvent Based Wet Look High Gloss Acrylic Concrete Sealer and Paver Sealer (5 GAL)

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

 

TOP