Foundation Armor manufactures penetrating, wet look, and high gloss sealers that can be used to seal concrete, brick, paver, aggregate, and natural stone sidewalks and walkways. They are professional grade, long lasting, and can easily be applied with a pump sprayer or roller. Whether you are looking to protect against deterioration, or enhance a dull and faded surface, Foundation Armor has a product for your application.
Penetrating sealers are designed to penetrating through the surface of the concrete in order to form an invisible barrier within the pores. Penetrating sealers can’t be seen from surface as they will not change the look, color, or appearance of the concrete, brick, aggregate, stone, or pavers. Penetrating sealers are great to use if you are looking for a long-lasting sealer that will help to prevent many of the issues featured above.
The most common type of penetrating sealer is a water repellent sealer. Water repellent sealers form a hydrophobic barrier within the pores that caused water and other liquids to bead off the surface. Surfaces sealed with a water repellent sealer experience a reduction in water absorption of up to 85-95%. Penetrating sealers do not change the appearance of the surface and therefore will not make the surface any more or less slippery when wet.
Armor SX5000 - DOT approved solvent based Silane Siloxane water repellent sealer. Looking to increase the strength and density of your concrete? Consider applying a Foundation Armor Concrete Densifier first, and then a water repellent sealer 5-7 days later.
Armor SX5000 WB - DOT approved water based Silane Siloxane water repellent sealer.
Armor SC25 - Cost effective water based Siliconate water repellent sealer.
Foundation Armor wet look and high gloss sealers are designed to both enhance and protect concrete, aggregate, paver, and stone surfaces. They penetrate in order to bond, and leave behind a visible surface film. Foundation Armor wet look and high gloss sealers are available in clear, as well as several color options. They are easy to apply, non-yellowing, and won’t flake or peel. While penetrating sealers are designed to reduce deterioration, coatings are designed to stop deterioration.
Armor AR350 - Solvent based wet look/low gloss acrylic sealer.
Armor AR500 - Solvent based high gloss acrylic sealer.
Armor AX25 - Solvent based Siloxane infused high gloss acrylic sealer for areas constantly exposed to high amounts of water.
Armor AG Brown Seal - Brown tinted solvent based high gloss acrylic sealer for exposed aggregate walkways.
Armor LV25 - Solvent based high gloss acrylic sealer for concrete walkways less than 28 days old.
Armor WB25 - Water based high gloss acrylic sealer for concrete walkways less than 28 days old.