Schools & Universities


Concrete Sealers for Schools & Universities


Foundation Armor manufactures several concrete sealers and coatings that can be used to seal, protect, and enhance a variety of interior and exterior surfaces. From outside patios to inside foyers, cafeterias to building exteriors, Foundation Armor has a product for your application. They are easy to apply and long lasting.


 


 



Sealers


Foundation Armor sealers are designed to work below the surface from within the surface pores. They will not change the look or color of the surface, and they won’t leave behind a visible surface film. They can be applied to both interior and exterior concrete, brick, aggregate, pavers, stone, and masonry.


Foundation Armor water repellent sealers are designed to protect surfaces against deterioration caused by water absorption such as cracking, spalling, pitting, staining, mold and mildew, and efflorescence. They will also help to protect against freeze thaw and salt damage.


Armor SX5000 - DOT approved solvent based Silane Siloxane water repellent sealer.


Armor SX5000 WB - DOT approved water based Silane Siloxane water repellent sealer.


Armor SC25 - Cost effective single-coat Siliconate water repellent sealer.


 

 

 

 

 

 




Coatings


Foundation Armor coatings are designed to enhance and protect interior and exterior concrete, aggregate, paver, and natural stone surfaces. They will help to darken dull or faded colors with a clear gloss, or replace with an attractive color coat over the entire surface. They are resistant to surface abrasion and traffic, and will help to prevent deterioration and staining.


Armor UTN60 - Industrial grade aliphatic urethane coating for interior concrete floors.


Armor Epoxy Moisture mitigating epoxy primer and top coat.


Armor AR350 - Easy to apply solvent based low gloss acrylic lacquer for interior or exterior concrete and masonry.


Armor AR500 - Easy to apply solvent based high gloss acrylic lacquer for interior or exterior concrete and masonry.


Armor AX25 - Easy to apply Siloxane infused solvent based high gloss acrylic for interior or exterior concrete and masonry.


Armor LV25 - Solvent based high gloss concrete cure and seal for interior or exterior concrete.


Armor WB25 - Water based high gloss concrete cure and seal for interior or exterior concrete.