16oz. Sample Armor WB15 Low Gloss Water Based Acrylic Concrete Sealer

The Armor WB15 is a low gloss water based acrylic cure and seal that meets or exceeds ASTM 1315 and ASTM C 309 standards. When properly applied, the Armor WB15 will help concrete to properly cure by reducing premature moisture loss. It will also help to reduce deterioration caused by surface abrasion, foot traffic, and spills.

While the Armor WB15 is approved as a cure and seal, it can also be applied to existing concrete and paver surfaces to achieve a long lasting, UV resistant, breathable low gloss finish.

$10.00
Availability: In stock
SKU
WB15SAMPLE

The Armor WB15 is a low gloss water based acrylic cure and seal that meets or exceeds ASTM 1315 and ASTM C 309 standards. When properly applied, the Armor WB15 will help concrete to properly cure by reducing premature moisture loss. It will also help to reduce deterioration caused by surface abrasion, foot traffic, and spills.

While the Armor WB15 is approved as a cure and seal, it can also be applied to existing concrete and paver surfaces to achieve a long lasting, UV resistant, breathable low gloss finish.

Coverage rates vary depending upon surface porosity and texture, and application method. Excessive build up should be avoided.

Coverage

Old or Porous Surfaces                                  175-250 ft2 /pail in one coat

Dense or Trowel Finished Surfaces          250-350 ft2 /pail in one coat      

Write Your Own Review
You're reviewing:16oz. Sample Armor WB15 Low Gloss Water Based Acrylic Concrete Sealer
Your Rating