Poured Concrete


Concrete Sealers for Poured Concrete


Foundation Armor penetrating concrete sealers, wet look and high gloss sealers, and concrete coatings can all be applied to interior and exterior concrete surfaces. Whether you are looking to protect your poured concrete surface while maintaining the unsealed look, or enhance the poured concrete with a wet look or high gloss finish, Foundation Armor has a product for your application.


Foundation Armor concrete sealers and coatings can be applied to poured concrete, stamped concrete, broom finished concrete, and trowel finished concrete.






Concrete Sealers for Freshly Poured Concrete


Foundation Armor cure and seals are designed specifically for sealing concrete that is less than 28 days old, or not fully cured. They aid with water retention and help with proper curing, reducing issues such as drying out, cracking, spalling, pitting. The protective film left behind will also help to reduce staining, hot tire pickup, mold and mildew growth, and efflorescence. They can be applied to both interior and exterior concrete.


Armor LV25 - Solvent based high gloss cure and seal.


Armor WB25 - Water based high gloss cure and seal.


Armor AX25 - Solvent based Siloxane infused high gloss cure and seal offering superior water repellency characteristics.



Penetrating Concrete Sealers


Foundation Armor water repellent sealers are designed to protect concrete from below the surface. They reduce water absorption by up to 95%, protecting the concrete against premature surface deterioration caused by that. Surfaces sealed with a water repellent sealer are more resistant to cracking, spalling, pitting, mold and mildew, and efflorescence.


Foundation Armor water repellent sealers chemically react below the surface to form a hydrophobic barrier within the pores. They do not change the look or color of the concrete surface, and they won’t leave behind a visible surface film. Surfaces sealed with a water repellent sealer will look exactly as they do prior to being sealed. Foundation Armor water repellent sealers can last for up to 10 years before the need for a reseal.


Armor SX5000 - Solvent based DOT approved water repellent sealer.


Armor SX5000 WB - Water based DOT approved water repellent sealer.


Armor SC25 - Water based single coat water repellent sealer .


Armor WL550 - Solvent based matte wet look water repellent sealer. 2 coat application.


For concrete surfaces that are experiencing cracking, spalling, pitting, dusting, or deterioration, a concrete densifier and surface hardener can be used prior to applying a water repellent sealer. Foundation Armor densifiers and surface hardeners will chemically react to form a permanent Calcium Silicate Hydrate (CSH) structure within the pores. The CSH structure, once fully cured, can help to increase the surface strength buy up to 45%. Concrete densifiers and surface hardeners should only be used to increase the strength and density of the concrete. They do not offer water repellent characteristics and can’t stop against further deterioration caused by water absorption, snow and ice, or salt damage.


Armor S2000 - Concentrated sodium silicate concrete densifier and surface hardener for porous concrete.


Armor L3000 - Concentrated lithium silicate concrete densifier and surface hardener for dense concrete.





Wet Look & High Gloss Coatings


Foundation Armor wet look and high gloss coatings are designed to enhance dull and faded surface, and provide a durable, long lasting low to high gloss coating on the surface. Foundation Armor coatings are resistant to UV rays, changes in weather and temperature, hot tire pickup, mold and mildew, and efflorescence.


Armor WL550 - Solvent based wet look matte water repellent sealer.


Armor AR350 -Solvent based wet look/low gloss acrylic sealer for interior and exterior concrete.


Armor AR500 - Solvent based high gloss acrylic sealer for interior and exterior concrete.


Armor AX25 - Solvent based Siloxane infused high gloss acrylic sealer for interior and exterior concrete.


Armor Epoxy - Water based epoxy coating for interior concrete.


Armor UTN60 - Industrial grade aliphatic urethane coating for interior concrete.