Increase the strength and density of concrete surfaces by up to 45% and reduce the movement of water through concrete pores with the Armor S2000 or Armor L3000 concrete hardeners and Densifiers. Foundation Armor densifiers chemically react below the surface to form a permanent crystalline barrier within the pores. They are not designed to leave behind a film or coating, or change the look or color of the concrete surface.
Armor S2000 - Sodium silicate based sealer. Dilute with up to 3 gallons of water.
Armor L3000 - Lithium silicate based sealer. Dilute with up to 3 gallons of water.
Reduce dusting, staining, cracking, spalling and pitting with a high solids, water repellent concrete sealer. Foundation Armor water repellents cause water and other liquids to bead off the surface. They are not designed to leave behind a film or coating, or change the look or color of the concrete, brick, or paver surface.
Armor SX5000 - Solvent based, high solids, Department of Transportation approved water repellent sealer for concrete, brick, stone, masonry, and tile.
Armor SX5000 WB - Water based water repellent sealer for concrete, brick, stone, masonry, and tile.
Armor AR350 - Wet look sealer designed to give substrates the appearance of being "wet". Enhances with a satin sheen finish.
Armor AR500 - High gloss pure acrylic sealer designed to enhance and protect interior and exterior concrete and paver surfaces.
Armor AX25 - Siloxane infused high gloss acrylic sealer designed to enhance and protect interior and exterior concrete and paver surfaces.
Armor LV25 - HIGH gloss solvent based acrylic sealer for new, uncured concrete.
Armor WB25 - HIGH gloss water based acrylic sealer for new, uncured concrete.
Increase the strength and density of concrete surfaces by up to 45% and reduce the movement of water through concrete pores with the Armor S2000 or Armor L3000 concrete hardeners and Densifiers. Foundation Armor densifiers chemically react below the surface to form a permanent crystalline barrier within the pores. They are not designed to leave behind a film or coating, or change the look or color of the concrete surface.
Armor S2000 - Sodium silicate based sealer. Dilute with up to 3 gallons of water.
Armor L3000 - Lithium silicate based sealer. Dilute with up to 3 gallons of water.
Reduce dusting, staining, cracking, spalling and pitting with a high solids, water repellent concrete sealer. Foundation Armor water repellents cause water and other liquids to bead off the surface. They are not designed to leave behind a film or coating, or change the look or color of the concrete, brick, or paver surface.
Armor SX5000 - Solvent based, high solids, Department of Transportation approved water repellent sealer for concrete, brick, stone, masonry, and tile.
Armor SX5000 WB - Water based water repellent sealer for concrete, brick, stone, masonry, and tile.
Armor AR350 - Wet look sealer designed to give substrates the appearance of being "wet". Enhances with a satin sheen finish.
Armor AR500 - High gloss pure acrylic sealer designed to enhance and protect interior and exterior concrete and paver surfaces.
Armor AX25 - Siloxane infused high gloss acrylic sealer designed to enhance and protect interior and exterior concrete and paver surfaces.
Armor LV25 - HIGH gloss solvent based acrylic sealer for new, uncured concrete.
Armor WB25 - HIGH gloss water based acrylic sealer for new, uncured concrete.