facebook

Acrylic Sealer Non-Slip AdditiveAcrylic Sealer Non-Slip Additive

Roll on to zoom in

More Views

Armor Non Slip Additive for Acrylic and Urethane Concrete Sealers - 16 OZ

$16.95

Availability: In stock

  • Buy 2 for $14.95 each and save 12%

UPC: 856994005367

* Required Fields

$16.95

QUICK OVERVIEW

The Armor Non-Slip additive is available in two grits, fine or coarse. It is mixed directly into the sealer before applying the second coat to the concrete. 

  • Details

    The Armor Non-Slip additive is available in two grits, fine or coarse. It is mixed directly into the sealer before applying the second coat to the concrete.

    For acrylic sealers, like the Armor AR350, Armor AR500, Armor AX25, and Armor LV25, mix approximately 3-4 ounces (do not exceed 6 ounces) of Armor Non-Slip Additive per gallon. Mix directly into the sealer before applying second coat.

    For urethane coatings, like the Armor UTN60, mix approximately 3-4 ounces (do not exceed 6 ounces) of Armor Non-Slip Additive per gallon. Mix directly into the sealer before applying second coat.

  • Coverage

    (1) container of non-slip is 16 OZ, which is enough for up to 5 gallons of sealer.

Customer Reviews

Non Slip Additive

Review by John(on 7/18/2017)
Customer Review

We purchased two containers of this product but never received the order even though there was a tracking number. I called after we did not receive it on the expected day and after some research they were unable to find the order so resent the additive right away. This was a great product to add to the sealer to keep anyone from falling around the pool. We would use this company again in the future.

Nonslip

Review by Nick(on 11/4/2014)
Customer Review

Easy to use and keeps everyone on their feet. Thanks!

Non-Slip Additive

Review by Wendy(on 11/4/2014)
Customer Review

I mixed this product in with the AX25 for my pool deck and also added it into the UTN60 coating for my garage floor. If you have a smooth surface, the non-slip is a good idea. It's cheap too. Basically it's a fine powder that you mix into a top coat. Easy enough for me, stops me from slipping on my butt!

WRITE YOUR OWN REVIEW

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Customer Review

Armor Non Slip Additive for Acrylic and Urethane Concrete Sealers - 16 OZ. The Armor Non-Slip additive is available in two grits, fine or coarse. It is mixed directly into the sealer before applying the second coat to the concrete. For acrylic sealers, like the Armor AR350, Armor AR500, Armor AX25, and Armor LV25, mix approximately 3-4 ounces (do not exceed 6 ounces) of Armor Non-Slip Additive per gallon. Mix directly into the sealer before applying second coat. For urethane coatings, like the Armor UTN60, mix approximately 3-4 ounces (do not exceed 6 ounces) of Armor Non-Slip Additive per gallon. Mix directly into the sealer before applying second coat.

Rating: 5/5 based on 3 review(s)
  • Price: $16.95
    Sold by Foundation Armor - Concrete Sealers

 

TOP