Penetrating Concrete Sealers


Penetrating Concrete Sealers


Foundation Armor manufactures several penetrating concrete sealers that can be applied to a variety of interior and exterior, vertical and horizontal surfaces, including concrete, brick, pavers, stone, and aggregate. They can easily be applied with a pump sprayer or roller, and when properly applied will yield years of life and performance. From invisible penetrating concrete sealers to wet gloss and high gloss sealers, Foundation Armor has a solution for your residential or industrial need.

 

 


Best Penetrating Concrete Sealers


Water Repellent Sealers


Foundation Armor water repellent concrete sealers are designed to penetrate through the surface and chemically react within the pores to form a long-lasting hydrophobic barrier that will release surface water absorption by up to 95%. Water repellent sealers will not change the look or color of the surface, and they won’t leave behind a visible surface film. Surfaces sealed with a water repellent penetrating concrete sealer become more resistant to snow and ice, road salts, staining, mold and mildew, and efflorescence.


 

Armor SX5000 - DOT Approved solvent based Silane Siloxane water repellent sealer for unsealed concrete, brick, pavers, masonry, natural stone.

Armor SX5000 WB - DOT approved water based Silane Siloxane water repellent sealer for unsealed concrete, brick, pavers, masonry, natural stone.

Armor SC25 - Penetrating siliconate water repellent sealer for unsealed white and very light concrete.

 

 

 



Concrete Densifiers & Surface Hardeners


Foundation Armor penetrating concrete densifiers and surfaces hardeners penetrate into the surface of the concrete where they chemically react to form a permanent Calcium Silicate Hydrate (CSH) structure within the pores. They can be used as part of a polishing system, to lock in concrete stains and dyes, or to increase the strength and density of the concrete.


For added protection against deterioration caused by water absorption, a water repellent sealer or coating should be applied after treating the concrete with a densifier.


Armor S2000 - Concentrated sodium silicate densifier for porous concrete.


Armor L3000 - Concentrated lithium silicate densifier for dense concrete.


Penetrating Concrete Densifier Sealers

 

 


Gloss Penetrating Concrete Sealers Acrylic Penetrating Concrete Sealer Color Chart


Wet Look & High Gloss Penetrating Concrete Sealers


Foundation Armor wet look and high gloss penetrating concrete sealers are designed to penetrate through the surface and aggressively bond within the pores. They are designed to enhance the natural characteristics or integral coloring, and provide a long-lasting non-yellowing surface coating that will protect the surface against deterioration, snow and ice, road salts, mold and mildew, and efflorescence.


Armor WL550 - Solvent based matte wet look sealer.


Armor AR350 - Solvent based wet look-low gloss sealer.


Armor AR500 - Solvent based high gloss sealer.


Armor WB25 - Water based high gloss sealer.


Armor AX25 - Solvent based Siloxane infused high gloss sealer for pool decks.