facebook

Concrete Driveway Sealers, Paver, Aggregate and Brick

Foundation Armor’s extensive line of concrete driveway sealers can be applied to a variety of driveways including poured and stamped concrete driveways, paver driveways, aggregate driveways, and brick driveways. Our long-lasting, UV and hot-tire resistant sealers are designed to provide lasting protection against deterioration caused by abrasion and exposure to the elements. From penetrating water repellent sealers and densifiers, to wet look and high gloss coatings, Foundation Armor has a professional grade product for you.

 

FEATURED DRIVEWAY SEALERS

Armor SX5000 Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

Armor AR500 Solvent Based Wet Look High Gloss Acrylic Concrete Sealer and Paver Sealer (5 GAL)

penetrating concrete driveway sealer

Concrete Densifiers & Surface Hardeners

Foundation Armor concrete densifiers and surface hardeners should only be used on poured concrete driveways. They chemically react within the pores to form a hardened Calcium Silicate Hydrate (CSH) structure within the pores. Densifiers are used to provide concrete surfaces with an increase in strength and density. Densifiers should only be applied to unsealed concrete surfaces, and if applied, should be applied prior to applying another type of sealer or coating. Not all concrete requires the use of a densifier. If you are unsure which type of sealer is right for you, please contact a Foundation Armor Technician.

Armor S2000 - Concentrated sodium silicate densifier.

Armor L3000 - Concentrated lithium silicate densifier.

FEATURED PRODUCTS

1 GAL Armor S2000 Concentrated Sodium Silicate Concrete Densifier Sealer and Surface Hardener

$74.95

1 GAL Armor L3000 Concrete Densifier and Surface Hardener

$84.95

5 GAL Armor S2000 Concentrated Sodium Silicate Concrete Densifier Sealer and Surface Hardener

Penetrating Water Repellent Concrete Driveway Sealers

Foundation Armor water repellent sealers are DOT-approved, high solids sealers chemically react below the surface to form invisible, protective barrier within the pores that causes water and other liquids to bead off the surface. Penetrating water repellent concrete driveway sealers do not change the look or color of the driveway, and they do not leave behind a visible surface film. They are naturally non-slip and can provide up to 10 years of life before the need for a reseal.

Concrete Driveways sealed with a water repellent sealer are more resistant to the damaging effects of water absorption such as cracking, spalling, pitting, freeze-thaw damage, and salt damage. Driveways sealed with a water repellent sealer are also more resistant to the growth of mold and mildew, and the formation of efflorescence. When properly applied, Foundation Armor penetrating sealers can last up to 10 years before the need for reapplication.

Armor SX5000 - High solids, DOT approved, solvent based Silane-Siloxane water repellent.2 coat application.

Armor SX5000 WB - High solids, DOT approved, water based Silane-Siloxane water repellent. 2 coat application.

Armor SC25 - High solids, cost effective water based Siliconate water repellent. 1 coat application.

Cure and Seal concrete driveway sealers

FEATURED PRODUCTS

Armor SX5000 Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor SX5000 WB Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor SC25 Siliconate Water Repellent Concrete Sealer with Salt Guard (5 GAL)

stamped concrete driveway sealercolor driveway sealers

Wet Look & High Gloss Concrete Driveway Sealers

Foundation Armor’s professional grade line of high gloss concrete driveway sealers can be used to seal concrete driveways, paver driveways, and aggregate driveways. High gloss concrete sealers are designed to enhance dull or faded surfaces with a clear high gloss finish. High gloss concrete sealers will never yellow, peel, or flake and they can withstand extreme variations in weather and temperature. When properly applied, high gloss concrete driveway sealers can last up to 3-5 years before the need for a recoat. The protective surface film left behind by the high gloss concrete sealer will reduce deterioration caused by water absorption and surface abrasion such as cracking, spalling, pitting, and staining. When applied to aggregate or paver driveways, high gloss concrete driveway sealers will help to secure loose pebbles or sand.

Armor AR350 - Professional grade solvent based WET LOOK-low gloss acrylic concrete sealer. 100% pure acrylic lacquer. Color packs and non slip additives also available.

Armor AR500 - Professional grade solvent based HIGH GLOSS acrylic concrete sealer. 100% pure acrylic lacquer. Color packs and non slip additives available.

Armor AG Brown Seal - BROWN TINTED high gloss sealer designed to enhance aggregate surfaces with a translucent brown-tinted high gloss finish. Non slip additive available.

Armor AX25 - Professional grade solvent based Siloxane infused HIGH GLOSS acrylic sealer. Great for use around areas constantly exposed to fresh, salt, or rain water. Color packs and non slip additives available.

FEATURED PRODUCTS

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

Armor AR500 Solvent Based Wet Look High Gloss Acrylic Concrete Sealer and Paver Sealer (5 GAL)

Armor AX25 Siloxane Infused High Gloss Acrylic Concrete Sealer (5 GAL)

Concrete Cure and Seals for Driveways Less Than 30 Days Old

Concrete cure and seals are concrete sealers that can be applied to concrete less than 28 days old. When applied to concrete driveways less than 28 days old they will aid in water retention and proper curing. The protective layer left behind by cure and seals will protect the concrete from deterioration and staining due to water absorption and surface abrasion.

Armor LV25 - Solvent based high gloss acrylic co-polymer.

Armor WB25 - Water based high gloss acrylic co-polymer.

Armor AX25 - Solvent based siloxane infused high gloss acrylic co-polymer offering superior water repellency for areas constantly exposed to water.

Armor SC25 - The Armor SC25 is not a cure and seal, but it can be applied to newly poured concrete surfaces. As a water repellent sealer, it will help to protect the surface of the concrete from premature deterioration caused by water absorption, mold and mildew, and efflorescence.

FEATURED PRODUCTS

Armor LV25 High Gloss Solvent Based Acrylic Concrete Cure and Seal (5 GAL)

Armor WB25 High Gloss Water Based Acrylic Concrete Cure and Seal (5 GAL)

Armor SC25 Siliconate Water Repellent Concrete Sealer with Salt Guard (5 GAL)

Concrete Driveway Cleaners

Looking to clean your concrete before sealing it? Consider using a heated pressure washer and mild cleaner to remove everyday stains, dirt, and debris. In many cases, the use of a heated pressure washer alone will do the trick! For other concrete problems, such as efflorescence, or worst stains, such as rust stains, consider the following cleaners:

Armor ER100 - Efflorescence remover and concrete cleaner.

Armor Rust Remover - Rust stain remover for concrete and masonry surfaces.

Armor Concrete Cleaner - Micro Etcher: Micro etcher and deep cleaner for concrete surfaces.

Armor PH Balance - PH balancing aid for concrete surfaces recently cleaned with an acid based cleaner.

FEATURED PRODUCTS

1 GAL Armor ER100 Efflorescence Remover and Cleaner

$54.95

1 GAL Armor Concrete Cleaner and Micro Etcher

$49.95

1 GAL Armor PH Balance

$39.95


Driveway Sealer Information & Resources

 

TOP