Foundation Armor basement wall and floor sealers are designed to reduce water and moisture, and enhance concrete surfaces. Whether you are having issues with water and moisture, want to reduce concrete dusting, or just want a change, Foundation Armor has a product for your basement application.
Reduce the movement of water through the pores of the concrete with a concrete surface hardener and densifier. Concrete surface hardeners and densifiers penetrate through the surface where they chemically react within the pores to form a hardened CSH structure. This structure can’t be seen on the surface, and surfaces treated with a densifier will not experience a change in look or color. The CSH structure formed within the pores is permanent and will increase in size with each additional coat. As the CSH structure expands, and the size of the pores is reduced – limiting the movement of water and moisture. Surface hardeners and densifiers will not stop water and moisture as they are breathable, and should only be applied to unsealed concrete, cinderblock, and concrete block surfaces.
Armor S2000 - Concentrated sodium silicate densifier and surface hardener for porous surfaces.
Armor L3000 - Concentrated lithium silicate densifier and surface hardener for dense surfaces.
For surfaces with moisture issues but no water issues, a water repellent sealer may be more appropriate. Water repellent sealers penetrate through the surface where they chemically react to form a hydrophobic barrier within the pores. Once the second coat has fully cured, moisture within the pores can be reduced by up to 2-3 LBS. Water repellent sealers will not stop moisture as they are breathable, and should only be applied to unsealed concrete, cinderblock, and concrete block surfaces. Water repellent sealers can be applied over surfaces previously sealed with the Armor S2000 or Armor L3000.
Armor SX5000 - DOT approved solvent based Silane Siloxane water repellent sealer.
Armor SX5000 WB - DOT approved water based Silane Siloxane water repellent sealer.
Foundation Armor basement floor coatings are designed to reduce moisture while enhancing the surface of the concrete. They are easy to apply, long lasting, and effective coatings for basement floors.
Foundation Armor basement floor coatings can be applied in clear, or one of several color options. Matte packs and non slip additives are also available.
Armor AR350 - Breathable solvent based low gloss acrylic concrete coating.
Armor AR500 - Breathable solvent based high gloss acrylic concrete coating.
Armor AX25 - Breathable Siloxane infused high gloss acrylic concrete coating for added moisture reduction.
Armor Epoxy - Non-breathable water based epoxy designed to reduce up to 5-7 LBS of moisture.
Armor UTN60 - Non-breathable solvent based aliphatic urethane designed to reduce moisture. When applied to a basement floor, applies best when applied over the Armor Epoxy as a topcoat.