facebook

Concrete Sealers for Automotive Garages & Shops

Foundation Armor concrete densifiers and surface hardeners penetrate deep into the surface of the concrete where they chemically react to form a hardened Calcium Silicate Structure (CSH) within the pores. Once cured, the structure formed within the pores can only be removed once the concrete itself is removed. Foundation Armor concrete densifiers are great to use on bare concrete floors that require an increase in surface strength or density.

 

Densifiers and Surface Hardeners for Automotive Facility Floors

Foundation Armor concrete densifiers and surface hardeners penetrate deep into the surface of the concrete where they chemically react to form a hardened Calcium Silicate Structure (CSH) within the pores. Once cured, the structure formed within the pores can only be removed once the concrete itself is removed. Foundation Armor concrete densifiers are great to use on bare concrete floors that require an increase in surface strength or density.

Armor S2000 - Concentrated sodium silicate based sealer for porous concrete. Dilute with up to 3 gallons of water.

Armor L3000 - Concentrated lithium silicate based sealer for dense concrete. Dilute with up to 3 gallons of water.

 

FEATURED PRODUCTS

1 GAL Armor L3000 Concrete Densifier and Surface Hardener

$84.95

5 GAL Armor S2000 Concentrated Sodium Silicate Concrete Densifier Sealer and Surface Hardener

Water Repellent Concrete Sealers for Automotive Facility Floors

Foundation Armor water repellent sealers penetrate deep into the surface of the concrete where they chemically react to form a hydrophobic barrier within the pores. Spilled water and other liquids will bead off the surface, allowing ample time for cleaning the surface before the spilled material can stain the surface. Water repellent sealers also help to reduce deterioration caused by water absorption, mold and mildew, dusting, and efflorescence.

Armor SX5000 - DOT approved solvent based Silane Siloxane water repellent sealer.

Armor SX5000 WB - DOT approved water based Silane Siloxane water repellent sealer.

Armor SC25 - Cost effective water based Siliconate water repellent sealer.

FEATURED PRODUCTS

Armor SX5000 Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor SX5000 WB Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor SC25 Siliconate Water Repellent Concrete Sealer with Salt Guard (5 GAL)

 

Industrial Automotive Facility Floor Coatings

Foundation Armor penetrating sealers will help to reduce deterioration and staining while Foundation Armor coatings are designed to stop deterioration. The protective film left behind by an industrial coating will protect the floor against deterioration and staining caused by oil and gas spills, hot tire pickup, chemicals and grease spills, mold and mildew, dusting, and efflorescence.

Armor UTN60 - Solvent based aliphatic urethane coating resistant to oil and gas, harsh liquids and chemicals.

Armor Epoxy - Moisture mitigating water based epoxy primer and top coat.

FEATURED PRODUCTS

Armor UTN60 Oil and Gas Resistant Aliphatic Urethane Concrete Floor Coating

2 GAL Armor Epoxy Coating Water Based Primer and Top Coat

$149.75

 

Easy to Apply Facility Floor Coatings

If the above Foundation Armor coatings are too industrial, or if you don’t have access to a diamond grinder to prepare the floor, one of the following coatings may be appropriate. They are very easy to apply and simply require the floor be clean and dry. They are resistant to oil and gas spills, hot tire pickup, and foot and vehicle traffic. They are designed to protect the floor long enough for spills to be quickly cleaned up. They are a great cost effective alternative to industrial coatings.

Armor AR350 - Low gloss solvent based acrylic sealer.

Armor AR500 - High gloss solvent based acrylic sealer.

Armor AX25 - High gloss Siloxane infused solvent based acrylic sealer.

Armor LV25 - Solvent based high gloss acrylic cure and seal for new concrete.

Armor WB25 - Water based high gloss acrylic cure and seal for new concrete.

FEATURED PRODUCTS

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

Armor AR500 Solvent Based Wet Look High Gloss Acrylic Concrete Sealer and Paver Sealer (5 GAL)

Armor AX25 Siloxane Infused High Gloss Acrylic Concrete Sealer (5 GAL)

 

TOP