Warehouse Floor Sealers

When it comes to sealing a warehouse floor there are a few types of warehouse floors that can be used. Which type of warehouse floor sealer is best for your warehouse depends on what you need the sealer to do and what you want the warehouse floor to look like once sealed.

Penetrating Warehouse Floor Sealers

Densifiers: Densifiers chemically react below the surface to form a crystalline barrier within the pores. They help to increase the strength and density of the concrete without changing the look. Densifiers are often used if you are looking to increase the strength, reduce dusting, or polish the warehouse floor.

Armor S2000: Concentrated sodium silicate based sealer. Dilute with up to 3 gallons of water.

Armor L3000: Concentrated lithium silicate based sealer. Dilute with up to 3 gallons of water.

Water Repellents: Water repellent sealers chemically react to form a hydrophobic barrier within the pores. They help to reduce staining, reduce dusting, reduce mold and mildew growth, and reduce deterioration caused by water absorption.

Armor SX5000: Solvent based, high solids, Department of Transportation approved water repellent sealer for concrete, brick, stone, masonry, and tile.

Armor SX5000 WB: Water based water repellent sealer for concrete, brick, stone, masonry, and tile.

 

 

Warehouse Floor Coatings

Coatings leave behind a visible surface film. They are designed to protect the concrete by leaving behind a protective surface film. Coatings are also used to enhance the appearance of the concrete, and to hide old stained surfaces.

 

Industrial Warehouse Floor Coatings

The following type of coatings are strong, durable, lasting coatings designed to stand up to the toughest of warehouse environments.

Armor UTN60:Chemical, acid, oil, gas, and scratch resistant high gloss aliphatic urethane coating for interior concrete surfaces.

Armor Epoxy: Moisture mitigating high gloss epoxy coating for interior concrete surfaces.

The following picture is of the Armor UTN60 in Medium Gray installed on a warehouse floor in Texas.

 

Warehouse Floor Coatings

While the following coatings aren't as durable and resistant as the coatings listed above, they can still yield years of life and performance in a warehouse application.

Armor AR350: Wet look sealer designed to give substrates the appearance of being "wet". Enhances with a satin sheen finish.

Armor AR500: High gloss pure acrylic sealer designed to enhance and protect interior and exterior concrete and paver surfaces.

Armor AX25: Siloxane infused high gloss acrylic sealer designed to enhance and protect interior and exterior concrete and paver surfaces.

Armor LV25 and WB25: High gloss acrylic cure and seals designed to cure and seal interior and exterior concrete surfaces.

FEATURED PRODUCTS

Armor SX5000 Penetrating Silane Siloxane Concrete Sealer and Masonry Water Repellent (5 GAL)

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer (5 GAL)

Armor AR500 Solvent Based Wet Look High Gloss Acrylic Concrete Sealer and Paver Sealer (5 GAL)

Armor UTN60 Oil and Gas Resistant Aliphatic Urethane Concrete Floor Coating

5 GAL Armor S2000 Concentrated Sodium Silicate Concrete Densifier Sealer and Surface Hardener

Armor SC25 Siliconate Water Repellent Concrete Sealer with Salt Guard (1 GAL)

$59.95