With Spring just around the corner, it is time to starting thinking about sealing your pool deck! Sealing your concrete or pavers will make sure your pool deck is protected against damage and deterioration caused by water absorption and surface abrasion. 

Why should I seal my pool deck? Water, salt, and chlorine can be very damaging to your concrete and pavers. They cause cracking, spalling, pitting, and staining. Hard rains, high winds, and even foot traffic will slowly eat away at the surface of your pool deck. If left unsealed, you will find your pool deck is harder to clean, harder to maintain, and will start to show signs of deterioration. There are many benefits to sealing your concrete or paver pool deck, including:

  • Sealers can help to reduce damage, deterioration, and staining caused by water absorption and surface abrasion.
  • Sealers can help to reduce the growth of mold and mildew and the surface, and make it easier to clean the pool deck and keep it clean.
  • Sealers can help to maintain the natural look of your concrete and pavers, or help to enhance them depending on the sealer you choose. 

What should I seal my pool deck with? Which sealer you use will depend on 1) what your pool deck is currently sealed with, 2) what you want your pool deck to look like once sealed, and 3) what you want the sealer to offer in terms of life and performance. 

First, let's tackle unsealed surfaces. If your concrete or pavers are currently unsealed, you are free to use the sealer of your choosing. The two most popular categories of sealers for pool decks are penetrating water repellent sealers, and acrylic sealers. 

Type of Sealer Appearance Benefits Life Products Non-Slip?
Silane-Siloxane Sealer No Change Reduces water absorption through concrete pores. 7-10 Years Armor SX5000 WB, Armor SX5000 Yes
Solvent-Based Acrylic Sealer Wet Look, low to high gloss, clear and color options Enhances and protects concrete 1-3 Years Armor AR350 (low gloss), Armor AR500 (high gloss), Armor WL550 (matte) Non-Slip Additive Suggested
Water-Based Acrylic Sealer Low to high gloss, clear Enhances and protects concrete 1-3 Years Armor WB25 (high gloss), Armor WB15 (low gloss) Non-Slip Additive Suggested

Let's go over the above chart in more detail. If you want a sealer that works entirely below the surface without changing the look or color, and one that won't leave behind a surface film, then you want a

Pool Deck Sealed with Armor AR350

Silane-Siloxane sealer. Silane-Siloxane sealers work entirely below the surface. They reduce water absorption by up to 95%, reducing the damaging effects of water absorption. They don't leave a surface film so the surface traction will remain the same. Silane-Siloxane sealers are a great sealer for those looking for a little adding protection without the maintenance. 

If you aren't happy with how your pool deck looks, and want a wet look or low to high gloss finish, then you want an acrylic sealers. Acrylic sealers are designed to enhance the surface, and provide a protective surface film. The coating takes teh abuse so that the concrete or pavers don't. Now, like with anything that leaves a surface film, acrylic sealers will be slippery when wet. For that reason it is suggested you add a non-slip additive to the topcoat. The non-slip additive is a plastic-like polymer (about the size of sugar or salt depending on which one you choose). The tiny crystals will create more traction on the surface to help reduce the slipperiness of the coating. 

Both silane-siloxane sealers and acrylic sealers are very popular options for pool decks. If you can't decide which is best for you, you can talk to a concrete tecnician, or apply a few samples to your pool deck. 

Now, let's tackle what to do if your concrete or pavers are currently sealed. What you have down for a sealer, and when your pool deck was last sealed, will have an impact on what you can reseal your pool deck with. Refer to our Concrete Sealer Buying Guide for an in-depth guide of what you can use to reseal your concrete or pavers.