Best Sealers

  1. Armor AR350 and Armor AR500 Acrylic Concrete Sealer Comparison

    What is the difference between the Armor AR350 and Armor AR500 wet look concrete sealers, and which wet look concrete sealer is better?

    That is a very common question, and the answer is quite simple. The Armor AR350 and Armor AR500 are both pure acrylic lacquer sealers that darken the surface of concrete and pavers to make them look wet. They offer the same benefits in terms of life and performance, but where they differ is their level of gloss. The Armor AR350 is a low gloss sealer and the Armor AR500 is a high gloss sealer. 

    If you want a light sheen, then the Armor AR350 is the best wet look sealer for your application. If you want a high gloss, then you want the Armor AR500.

    For phtos of each, please refer to the listings:

    Read more »
  2. Best Solutions for Fixing Slippery Concrete

    Concrete can be very slippery when wet, especially if the surface of the concrete is smooth troweled, polished, or dense. There are a few different things that can be done to help make the concrete more slip resistant:

    1. You can apply slip resistant pads or grip tape to various areas of the concrete to help provide more slip resistance. Slip Slip Resistant Concrete Sealersresistant tape is cost effective and easy to apply. 
    2. You can apply
    Read more »
  3. All Weather Concrete Sealer

    All Foundation Armor penetrating concrete sealers and acrylic concrete sealers are considered to be all weather concrete sealers because they are designed to withstand everything from cold New England temperatures to hot Arizona sun. 

    All Weather Water Repellent Concrete Sealers

    If you are looking to seal your concrete without changing the look or color of the surface then you want a water repellent sealer. All Weather Penetrating Concrete Sealer Water repellent sealers, like the Armor SX5000/SX5000 WB and Armor SC25, chemically react below the surface to form a water repellent barrier within the pores that reduce water absorption on the surface by up  to 95%. Once fully cured, water repellent sealers will help to reduce damage, deterioration, and staining caused by water absorption

    Read more »
  4. Acetone Based Concrete Sealers

    Acetone based concrete sealers are escentially solvent based concrete sealers. Solvent based concrete sealers are typically suspended in either Xylene or acetone, and when the concrete sealer is applied, the xylene and acetone evaporate and all that is left in or on the concrete is the sealer.

    The most common types of acetone based concrete sealers are Silane-Siloxane water repellent sealers and acrylic sealers.

    Acetone Based Penetrating Concrete Sealers

    Silane-Siloxane water repellent sealers, like the Armor SX5000, are penetrating concrete sealers that protect the concrete, brick, Concrete Sealed with an Acetone Based Water Repellent Concrete Sealerand pavers without chaning their look, color, or appearance. They penetrate into the surface of the concrete

    Read more »
  5. Best High Gloss Concrete Sealers

    The best high Concrete Sealed with a High Gloss Sealer gloss concrete sealer for your concrete will depend on whether or not you are sealing interior or exterior concrete, and whether or not you are sealing unsealed concrete or concrete with a coating currently on it.

    The three best high gloss concrete sealers for exterior concrete are:

    Read more »
  6. Best Silane Siloxane Concrete Sealers

    The best Silane-Siloxane sealers are:

    So, what makes them so great? A few things actually. First, the Armor SX5000 and Armor SX5000 WB are Department of Best Silane Siloxane Concrete SealersTransportation (DOT) approved water repellent sealers which means they have undergone a serious of tests and been approved for use as water repellent sealers on roadways

    Read more »
  7. Best Brick Chimney Sealers

    The best type of concrete sealer to use on brick chimneys is a Silane-Siloxane water repellent sealer. Silane-Siloxane water repellent sealers will  help to reduce staining and deterioration caused by water absorption. They will also Brick Chimney Sealershelp to reduce the formation of mold, mildew, and efflorescence. Silane-Siloxane water repellents can be used to seal the entire brick chimney, grout included.

    Read more »
  8. Best Breathable Sealers

    Penetrating concrete sealers and acrylic sealers are all classified as breathable sealers. They penetrate into the concrete in order to chemically react or bond, but allow moisture vapors to pass through to the surface. Silicate concrete sealers and water repellent sealers are the most breathable type of sealer, and acrylic sealers are a close second. The breathability of an acrylic sealer will vary depending on the percent solids of the formula. 15-25% solids acrylic sealers are ideal for breathability. Once you start getting into 30% or more, the acrylic can have issues with delamination if moisture is present below the surface.

    Best Breathable Sodium Silicate Concrete Desifiers

    Sodium silicate sealers penetrate into the surface of the concrete where they chemically react to form a crystalline barrier within the pores. The barrier, once cured, will help to increase the strength and density of the concrete, and reduce dusting and deterioration caused by

    Read more »
  9. Best Oil Repellent Concrete Sealers

    Concrete sealers will not stop oil from staining concrete. Period. Think of it this way: penetrating sea Oil Stains on Concretelers penetrate into the concrete where they chemically react in the pores. The surface of the concrete is left exposed so when oil gets spilled onto the surface, a sealer may slow down the movement of the oil into the pores, but the exposed concrete will stain. If you spill oil on the surface of concrete, it should be cleaned up immediately in order to prevent staining.

    The three most common types of penetrating sealers are silicate concrete sealers, Silane-Siloxane water repellent sealers, and Siliconate concrete sealers. Silicate concrete sealers will increase the strength of the concrete in order to

    Read more »
  10. Best Salt Water Pool Deck Sealers

    Salt Water Concrete Pool Deck Sealer

    In order to choose the best concrete sealer for your salt water pool deck, it is important to understand the type of concrete sealers available and how they work to protect the concrete. 

    Salt Water Pool Decks

    Salt water pool decks are a bit different than fresh water pool decks because salt water pools contain salt. When the water carrying the salt get splashed onto the concrete, the water will evaporate and the salt will be left on the surface. If the concrete pool deck is unsealed, the salt will get carried into the pores and deposited there. If the concrete pool deck is sealed, the salt will get deposited on the surface.

    It is very important to make sure that the concrete pool deck has been properly cleaned before applying a sealer because if the salt is not removed from the surface and within the pores, the salt can cause issues with penetration and adhesion.The best way to clean a concrete pool deck around a salt water pool is with a heated pressure

    Read more »
Page