1 GAL Armor PH Balance

PH balance and acid neutralizer for concrete surfaces.

Availability: In stock
For Same Day shipping place your order in the next

Armor Balance is a superior blend of neutralizing agents and specialty additives which create a solution unmatched in the industry. Balance neutralizes residues left from acid based stains and other acid based products used on concrete. Balance contains a special additive which not only results in excellent coating adhesion, but enhances acid stain applications.

Armor Balance is recommended for interior and exterior concrete where acid based products have been used and a neutral surface is required to coat the substrate.


Mix solution prior to use. Separation can occur over long storage.

Application Instructions

Apply this product using a sprayer or mop. Apply undiluted Balance at a rate of 150-200 square feet per gallon to ensure proper pH neutralization. This product should be used in place of the first application of clean-up water when acid based cleaners, prep products, or acid based stains are used. When using as the neutralizing agent for acid based stains, it is recommended to mop on (interior floors) to help release excessive residues left behind. Allow Balance and any plain water rinses after that to dry 18-24 hours prior to applying any coatings (Refer to coating manufacturer’s instructions for proper application timing).  Substrate temperature must be no less than 40 degrees F and not exceed 80 degrees F.


Use Soap and Water. Dispose of containers in accordance with local and federal regulations.

One gallon covers up to 150-200 FT2 undiluted.

Write Your Own Review
You're reviewing:1 GAL Armor PH Balance
Your Rating